Features power switch and voltage indicating light for battery status, to remind users to avoid over discharge the receiver’s battery and out of control caused by low voltage.

For some servos such as Futaba servo models 9241, 9251, 9253, 9254, 9255, 9256 and other digital servos are not capable of handling 6V, please connect a 5.1V step-down voltage regulator to the rudder servo, or connect it between BEC (ex. RCE-B6X) and the receiver for all servos. It could avoid the servos overloading and damaged.

Output voltage: DC 5.8V

Max. continuous current: 6A

Size: 60x34x15mm

Weight: 31g(including wire set)

[5.1V two-way step-down voltage regulator]

Max continuous current: 5A

Length:104mm

Weight:4.2g

Input voltage: DC 7.4V 2CELL Lithium battery

Output voltage: DC 5.8V

Max. continuous current: 6A

Size: 60x34x15mm

Weight: 31g(including wire set)

Using linear design, input power: 2 cell Li-ion or Li-poly battery, features no interference to receiver.

Some servos such as Futaba servo models 9241.9251.9253.9254.9255.9256, and other digital servos not capable of handling 6V. Please connect a 5.1V Step-Down Voltage Regulator inline between the Gyro and the rudder servo. If you are using a servo that can accept 6V input, the regulator is not required.

Features power switch and voltage indicating light for battery status, to remind users to avoid over discharge the receiver’s battery and out of control caused by low voltage.

Input voltage: DC 7.4V 2CELL Lithium battery

Output voltage: DC 5.8V

Max. continuous current: 3A

Size: 60x25x6mm

Weight: 15g(including wire set)

5.1V step-down voltage regulator x 1